> ## Documentation Index
> Fetch the complete documentation index at: https://doc.qbilon.io/llms.txt
> Use this file to discover all available pages before exploring further.

# PRTG Setup Wizard

> Follow the PRTG Setup Wizard to configure automated monitoring.

## Preface

The PRTG Onboarding Wizard guides you through the initial setup of your instance with as few steps as possible. The essential data required to connect to your vSphere, AWS, and Azure IT environments, as well as the information needed to access your PRTG instance for monitoring the aforementioned environments, will be collected in the process.

> [!NOTE]
>
> You can only run the PRTG Setup Wizard once at the beginning of a Qbilon setup. After that, it will not be accessible again. However, you can manually replicate all of its steps at any time by creating your own automations in Qbilon.

## Data Import

Once you have set up and activated your instance as described in [On-Prem Setup](https://doc.qbilon.io/02-on-prem-setup/index), the setup wizard will greet you as follows:

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/lr-P4KF_9wn8x9Vs/.gitbook/assets/c1bc9ed8-b0e6-451f-82b4-9027dddcb36b-image.png?fit=max\&auto=format\&n=lr-P4KF_9wn8x9Vs\&q=85\&s=f045c31a09c4f2b80d16186dab3360d0)

The first and most important step is to connect Qbilon to your existing PRTG instance. You can do this by clicking "Add credentials," as shown in the following image:

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/Jmla3tEw4FRYjkNT/.gitbook/assets/b8c4f91a-c153-4bfb-a738-2af918cd65c7-image.png?fit=max\&auto=format\&n=Jmla3tEw4FRYjkNT\&q=85\&s=ba60d3589671584caa2e878963f669e4)

The input parameters here are the same as those required to create a PRTG task in an automation. For more information about the individual fields, refer to the [PRTG](https://doc.qbilon.io/06-data-sources/internal-connectors/prtg.md) documentation page.

It is necessary to connect at least one PRTG instance to Qbilon; otherwise, the wizard will not be able to link the IT landscape to be captured with the corresponding PRTG monitoring. However, if you decide to set up Qbilon without using the setup wizard and instead create your own automations, you can click the "Cancel" button at any time. The wizard will then take you directly to the usual Qbilon start screen.

After adding one or more PRTG instances, you will be prompted to enter the credentials needed for read-only access to your IT landscape in vSphere, Azure, or AWS. The PRTG Wizard will then guide you through the process of creating these credentials. These credentials are similar and look as follows:

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/lr-P4KF_9wn8x9Vs/.gitbook/assets/e09824fe-f4f8-48be-9f24-738d211cc876-image.png?fit=max\&auto=format\&n=lr-P4KF_9wn8x9Vs\&q=85\&s=019cb91cd4cc0612ef6d63b093efca1b)

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/Jmla3tEw4FRYjkNT/.gitbook/assets/ba603a4b-bf3f-484f-88b7-69f46b2f5519-image.png?fit=max\&auto=format\&n=Jmla3tEw4FRYjkNT\&q=85\&s=120937605216f7622b70d52e7be89dc1)

If you do not use one or more of these solutions in your company, you can simply skip the setup using the "Next" button.

Since the input forms for the credentials of the various connectors are the same as those used for manually creating a new connector task, additional information on creating and retrieving the necessary credentials can be found on the respective connector pages: [Microsoft Azure](https://doc.qbilon.io/06-data-sources/internal-connectors/microsoft-azure.md), [Amazon Web Services (AWS)](https://doc.qbilon.io/06-data-sources/internal-connectors/amazon-web-services-aws.md) and [vSphere](https://doc.qbilon.io/06-data-sources/internal-connectors/vsphere.md).

After entering all the credentials, Qbilon will create a new automation in the background to query and execute all this data for the first time.

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/lr-P4KF_9wn8x9Vs/.gitbook/assets/da605a69-b938-48a3-8add-ef986840fccf-image.png?fit=max\&auto=format\&n=lr-P4KF_9wn8x9Vs\&q=85\&s=fa12006bc93042224706328520c3b457)

Depending on the size of the respective IT landscape, this process can take anywhere from a few minutes to an hour. Based on experience, most medium-sized environments usually take between 10 and 20 minutes. You will also be shown the progress of the respective data import, meaning you can see which connector is currently running and how many data sources are still pending for import.

## Data Consolidation

After successfully importing data from your IT landscape and existing PRTG monitoring, Qbilon offers the option to automatically link them. Qbilon provides a selection of pre-configured linkers for this purpose, depending on the imported data. For more information about linkers, please refer to the [Custom Linker](https://doc.qbilon.io/07-data-consolidation-writer/custom-linker.md) documentation page.

![PRTG Setup Wizard: Data Consolidation](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/1dc4db4e-d884-4aae-a2ca-6dcaf88bdb80-image.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=7c5d199dc4cce42c092158f7b33effb5)

Depending on the imported data, Qbilon may not display all the available linkers. For instance, if no data has been imported from AWS or the AWS import did not find any EC2 instance information, Qbilon will not display the "PRTG ↔ AWS" linker.

The linkers presented here connect your IT assets with existing PRTG devices that monitor them. They do this by matching the host address of the PRTG devices with the properties of the Azure virtual machines, AWS EC2 instances, and vSphere VMs that were retrieved. If a machine's value matches that of a PRTG device, the linker creates a "monitored by" relationship between the two respective Qbilon assets.

All possible linkers are selected by default, but you can choose to create your own custom linker later. This will allow you to establish the "monitored by" relationship using your own logic.

Once you have selected the desired linkers and clicked "Next," Qbilon will create a second automation in the background that includes all the selected linkers. This automation will then be executed, and the progress will be displayed to you in a manner similar to the initial data import:

![PRTG Setup Wizard: Data Consolidation](https://mintcdn.com/qbilon-docs/Jmla3tEw4FRYjkNT/.gitbook/assets/b7c2df2c-fd9f-4340-bacd-eadec56698d7-image.png?fit=max\&auto=format\&n=Jmla3tEw4FRYjkNT\&q=85\&s=feb80ebadb0bc87d7d07029580a333f5)

## Data Visualization

Once Qbilon has successfully linked your IT landscape with your monitoring, the Setup Wizard will offer you a list of pre-configured views of your IT landscape and connected monitoring. Only views for which all the necessary data types are available will be suggested. For example, if no AWS data was imported during the initial import, no EC2 instance views will be suggested. Therefore, the following screen may contain different views.

![PRTG Setup Wizard: Data Visualization](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/3af3394c-1717-4acf-ba38-30e7168b62e6-image.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=10475c53afc6550a098e0c1cf78dc31b)

Now, you can select which views Qbilon should automatically create for you. If you change your mind, you can always create your own custom views of the imported and consolidated data. You can refer to the documentation on view creation on our [Creating Views](https://doc.qbilon.io/08-creating-views/index) documentation page.

However, if you select one or more of the offered views, Qbilon will create them for you after you click the "Next" button. Qbilon will also inform you about the progress of the creation process.

![PRTG Setup Wizard: Data Visualization](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/2f4e2b3a-30dd-493b-af42-6501b16f6f4e-image.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=8b9914078afd8032c55ce4fdf7c7325b)

Once the views have been successfully created, Qbilon will provide you with an overview of your configured instance and a direct entry point to jump into one of the prepared views.

![PRTG Setup Wizard: Data Visualization](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/3d0d38cd-f141-462f-b78c-a45b91d32571-image.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=fbdb1f4ef3efa2d6080b3fdc3be161b8)

Congratulations! You have successfully installed and set up your PRTG instance with Qbilon 🎉.

## Behavior in Case of Errors

Qbilon will notify you if an error occurs while running through the Setup Wizard, which is unlikely.

![PRTG Setup Wizard: Behavior in Case of Errors](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/53445b51-1232-46bb-87b2-4258c651131d-image.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=85abb3e89b612ad00d777b1a06811e86)

Then, you will have the option to go directly to the Qbilon "Home" page. All steps completed up to that point will be retained by Qbilon. For example, if you successfully complete the data import but encounter an error during data consolidation, Qbilon will retain the data import automation. You can then create the corresponding linker automation for data consolidation manually.

In the event of an error, we have prepared a guide below that walks you through all the steps manually that the PRTG Setup Wizard would otherwise perform for you behind the scenes. This will make it as easy as possible for you to reach a similar state as after a successful completion of the PRTG Setup Wizard.

### Data Import

If the Setup Wizard encountered an error while importing your data initially, the import automation may not have been created. If so, go to the "Automations" section in Qbilon and create a new automation.

For each data source you want to add, create a new task within the automation. It is possible that your Qbilon instance will display different task types, but you should at least find [Amazon Web Services](https://doc.qbilon.io/06-data-sources/internal-connectors/amazon-web-services-aws.md), [Microsoft Azure](https://doc.qbilon.io/06-data-sources/internal-connectors/microsoft-azure.md), [vSphere](https://doc.qbilon.io/06-data-sources/internal-connectors/vsphere.md) and [PRTG](https://doc.qbilon.io/06-data-sources/internal-connectors/prtg.md) there.

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/lr-P4KF_9wn8x9Vs/.gitbook/assets/c1644b86-5771-4d7c-8179-e8589a1276d1-screenshot-2026-10-15-160648.png?fit=max\&auto=format\&n=lr-P4KF_9wn8x9Vs\&q=85\&s=42fe07cb57e773b54baa095b8875737c)

When creating each task, Qbilon will guide you through the necessary parameters, just as the Setup Wizard would. For the execution settings of the first task, select "Schedule" and choose the desired interval for the data import. For all subsequent tasks, select "Dependency" as execution type and choose a previously created task in the automation as the trigger.

For example, if you want to connect a PRTG instance, an AWS account, an Azure account, a vSphere instance and finally an VMware Aria instance, your automation could look as follows:

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/37bfa805-f910-4147-b3e9-81e638960993-screenshot-2026-10-15-162001.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=64598dd876e1fb98a2b926732eb77497)

Finally, run the automation manually once to ensure all data is imported by clicking the play button on the top right corner.

![PRTG Setup Wizard: Data Import](https://mintcdn.com/qbilon-docs/lr-P4KF_9wn8x9Vs/.gitbook/assets/c961ff17-7dde-42f7-b10f-17a7e0a2c4f6-screenshot-2026-10-15-162155.png?fit=max\&auto=format\&n=lr-P4KF_9wn8x9Vs\&q=85\&s=6dc1a1265718e5965bf6f0858618afa1)

### Data Consolidation

If the Setup Wizard successfully imports the data but encounters a linking problem, you can easily resolve it by creating a second automation in Qbilon that contains all the necessary linkers and executes them one after the other. The linkers that the wizard would have created for you can be recreated by creating a custom linker task.

Go to the `Automations` section in Qbilon, choose the specific automation (workflow) and click on the "+" icon that appears while hovering over a task or the round start cursor icon. Afterwards, select "Custom Linker" within the "Data Consolidation" section in the right side-panel and configure it as follows:

![PRTG Setup Wizard: Data Consolidation](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/2c755968-f154-46dc-b474-3edb4ab60823-screenshot-2026-10-15-164153.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=8eae3d2141c8512c847e907d2ef04d96)

### PRTG ⇔ vSphere

> *Link* *`Device`* *with* *`Device`*
> *when* *`PRTG Host (text)`* *contained in* *`IP Address (Text)`*
> ***or***
> *when* *`PRTG Host (text)`* *equals* *`Hostname (Text)`*
> *with* *`monitored by`*

![PRTG Setup Wizard: PRTG ⇔ vSphere](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/065d6729-44da-4527-8700-c5fa4d30c21e-screenshot-2026-10-15-162534.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=408774399a7c35fbde8f322a0d1fbb36)

### PRTG ⇔ AWS

> *Link* *`Device`* *with* *`AWS EC2`*
> *when* *`PRTG Host (text)`* *equals* *`Public IP Address (Text)`*
> *with* *`monitored by`*

### PRTG ⇔ Azure

> *Link* *`Device`* *with* *`Azure Virtual Machine`*
> *when* *`PRTG Host (text)`* *equals* *`Public IP Address (Text)`*
> *with* *`monitored by`*

### Data Visualization

If the Setup Wizard aborted during or after linking, you can download the views here:

[PRTG Views.zip](https://t2428330.p.clickup-attachments.com/t2428330/a85caef5-93a1-495f-b5eb-1a7a08a0b8b3/PRTG%20Views.zip)

After downloading and unzipping the files, you can import all views by clicking the "Import View" button at the top of the list in the "Customs Views" section.

![PRTG Setup Wizard: Data Visualization](https://mintcdn.com/qbilon-docs/lr-P4KF_9wn8x9Vs/.gitbook/assets/f275ce6c-a126-4745-9acc-435ded45b088-screenshot-2026-10-15-160945.png?fit=max\&auto=format\&n=lr-P4KF_9wn8x9Vs\&q=85\&s=2e4cb2bc00d7a39997b5a2272971674b)

![PRTG Setup Wizard: Data Visualization](https://mintcdn.com/qbilon-docs/aJQhbcvq7mtvhV0w/.gitbook/assets/194c185c-e32f-44ce-9ba3-a4067a98f317-screenshot-2026-10-15-161218.png?fit=max\&auto=format\&n=aJQhbcvq7mtvhV0w\&q=85\&s=299b803a54a7c9a1d5079851f79b3ecb)

During the import process, any views that are incompatible with the imported data in your Qbilon instance will not be imported and will be marked as "failed." You can ignore this message because the compatible views will be available in your Qbilon instance subsequently.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.